Leave Your Message

4015 40*40*15mm DC Cooling Fan For Aromatherapy Diffuser

1. Operating ambient temperature
Ball bearing: -30 to +75℃
Sleeve bearing: -10 to +70℃

2. Insulation resistance: 
10 meg ohms min, at 500V DC (between frame and terming)
Dielectric strength: 5mA max at 500V/AC/60Hz one minute (between frame and terminal)

    Product ParameterParameter

    Model Bearing
     Type
    Rated 
    Voltage
    Current Speed Air Flow Pressure Noise Weight
    VDC A RPM CFM mmH₂O dBA g
    FD2440157S/B Sleeve/Ball 24 0.08 8000 7.9 7.8 30.8 17
    FD2440155S/B 0.07 7000 6.9 6.0 27.3
    FD2440153S/B 0.06 6000 6.0 4.5 23.3
    FD1240157S/B Sleeve/Ball 12 0.14 8000 7.9 7.8 30.8
    FD1240155S/B 0.10 7000 6.9 6.0 27.3
    FD1240153S/B 0.08 6000 6.0 4.5 23.3
    FD0540157S/B Sleeve/Ball 5 0.24 7000 6.9 6.0 27.3
    FD0540155S/B 0.15 6000 6.0 4.5 23.3
    FD0540153S/B 0.12 5000 5.0 3.1 18.6

    40150494f401505usm

    Product introductionintroduction

    1. Operating ambient temperature
    Ball bearing: -30 to +75℃
    Sleeve bearing: -10 to +70℃

    2. Insulation resistance: 
    10 meg ohms min, at 500V DC (between frame and terming)
    Dielectric strength: 5mA max at 500V/AC/60Hz one minute (between frame and terminal)

    3. Functions:
    Frequency generator signal option 

    4.Rated voltage: 12V .5V

    5.Converters and Inverters

    6.◎Converters

    7.These are devices that transform single-phase and three-phase AC into DC using semiconductor elements such as diodes, silicon controlled rectifiers, or transistors. They are commonly referred to as rectifiers or converters.

    8.Larger DC motors with an output of 30kW are typically driven by converters, while smaller DC motors also have instances where they are operated by converters.

    9.◎Inverters

    10.On the other hand, inverters are devices that convert DC to three-phase AC.

    11.Modern refrigerators and indoor air conditioners utilize inverters to power motors and drive compressors.

    12.For home air conditioners, converters first change single-phase AC to DC before inverters then convert it to three-phase AC in order to operate the motors. Although this may seem complex, there are objective reasons for its implementation.